最近有很多人玩WiFi棒子出現許多不同的問題的，今天我來將這些問題匯總，下次再也不用問別人啦！

刷入Debian的教程去看up主云玄楓的視頻，這里不多講述，鏈接如下（僅刷入Debian的話后半部分寶塔面板的安裝可跳過）：

「極致便攜！」我用11元打造了一個隨插隨用的USB網站服務器！

1. 按住按鈕進入9008電腦設備管理器無法顯示的(或者顯示未知設備)：

   這里基本上是沒有安裝9008驅動的，只要將驅動安裝上就行。

   鏈接：https://wwt.lanzouj.com/ihg1A0a9itcj

   密碼：9g0y

   
   

2. 無法顯示ADB設備的：

   這里大概率也是沒有安裝上驅動的，安裝基本上就沒問題了。

   鏈接：https://wwt.lanzouj.com/iEqxN0a9ituh
   密碼：ejm4

   
   

3. 用搞機工具箱或ADB命令行進入bootloader模式后依然顯示ADB設備或?yàn)閬y碼設備名：

   雙擊該設備查看制造商，如果制造商為vivo.Inc，則刪除該驅動，因?yàn)橹鞍惭b9008驅動時會將vivo的ADB驅動一起安裝上，會將問題二中的ADB驅動給擠掉，所以刪除該ADB驅動，但并不會影響9008驅動。刪除后顯示設備名稱是LeMobile名稱開頭后再進入bootloader就能正常顯示了。

4. 刷完Debian后沒有顯示RNDIS而是ADB設備：

   將ADB驅動刪除，然后重新插入棒子就能顯示出來了，如果依然顯示ADB設備證明有多個ADB驅動，一直刪除直到RNIDS設備顯示出來就行。

   
   

5. RNDIS驅動安裝失?。?/p>

   目前沒找到解決方法，建議換臺電腦嘗試，配置好WiFi連接后通過局域網IP訪問即可。

   
   

6. 修改軟件包源：

   先安裝nano：apt-get install nano

   進入軟件包源地址文件：nano?/etc/apt/sources.list

   刪除sources.list中所有內容，輸入以下更新源地址（全部復制粘貼寫入sources.list文件，任選一個即可）：

   阿里云（推薦）：

   deb https://mirrors.aliyun.com/debian/ bullseye main non-free contrib

   deb-src https://mirrors.aliyun.com/debian/ bullseye main non-free contrib

   deb https://mirrors.aliyun.com/debian-security/ bullseye-security main

   deb-src https://mirrors.aliyun.com/debian-security/ bullseye-security main

   deb https://mirrors.aliyun.com/debian/ bullseye-updates main non-free contrib

   deb-src https://mirrors.aliyun.com/debian/ bullseye-updates main non-free contrib

   deb https://mirrors.aliyun.com/debian/ bullseye-backports main non-free contrib

   deb-src https://mirrors.aliyun.com/debian/ bullseye-backports main non-free contrib

   中科大：

   deb https://mirrors.ustc.edu.cn/debian/ bullseye main contrib non-free
   

   deb-src https://mirrors.ustc.edu.cn/debian/ bullseye main contrib non-free

   deb https://mirrors.ustc.edu.cn/debian/ bullseye-updates main contrib non-free

   deb-src https://mirrors.ustc.edu.cn/debian/ bullseye-updates main contrib non-free

   deb https://mirrors.ustc.edu.cn/debian/ bullseye-backports main contrib non-free

   deb-src https://mirrors.ustc.edu.cn/debian/ bullseye-backports main contrib non-free

   deb https://mirrors.ustc.edu.cn/debian-security/ bullseye-security main contrib non-free

   deb-src https://mirrors.ustc.edu.cn/debian-security/ bullseye-security main contrib non-free

   清華鏡像站：

   deb https://mirrors.tuna.tsinghua.edu.cn/debian/ bullseye main contrib non-free

   deb-src https://mirrors.tuna.tsinghua.edu.cn/debian/ bullseye main contrib non-free

   deb https://mirrors.tuna.tsinghua.edu.cn/debian/ bullseye-updates main contrib non-free

   deb-src https://mirrors.tuna.tsinghua.edu.cn/debian/ bullseye-updates main contrib non-free

   deb https://mirrors.tuna.tsinghua.edu.cn/debian/ bullseye-backports main contrib non-free

   deb-src https://mirrors.tuna.tsinghua.edu.cn/debian/ bullseye-backports main contrib non-free

   deb https://mirrors.tuna.tsinghua.edu.cn/debian-security bullseye-security main contrib non-free

   deb-src https://mirrors.tuna.tsinghua.edu.cn/debian-security bullseye-security main contrib non-free

   華為：

   deb https://mirrors.huaweicloud.com/debian/ bullseye main non-free contrib

   deb-src https://mirrors.huaweicloud.com/debian/ bullseye main non-free contrib

   deb https://mirrors.huaweicloud.com/debian-security/ bullseye-security main

   deb-src https://mirrors.huaweicloud.com/debian-security/ bullseye-security main

   deb https://mirrors.huaweicloud.com/debian/ bullseye-updates main non-free contrib

   deb-src https://mirrors.huaweicloud.com/debian/ bullseye-updates main non-free contrib

   deb https://mirrors.huaweicloud.com/debian/ bullseye-backports main non-free contrib

   deb-src https://mirrors.huaweicloud.com/debian/ bullseye-backports main non-free contrib

   網易：

   deb https://mirrors.163.com/debian/ bullseye main non-free contrib

   deb-src https://mirrors.163.com/debian/ bullseye main non-free contrib

   deb https://mirrors.163.com/debian-security/ bullseye-security main

   deb-src https://mirrors.163.com/debian-security/ bullseye-security main

   deb https://mirrors.163.com/debian/ bullseye-updates main non-free contrib

   deb-src https://mirrors.163.com/debian/ bullseye-updates main non-free contrib

   deb https://mirrors.163.com/debian/ bullseye-backports main non-free contrib

   deb-src https://mirrors.163.com/debian/ bullseye-backports main non-free contrib

   騰訊云：

   deb https://mirrors.tencent.com/debian/ bullseye main non-free contrib

   deb-src https://mirrors.tencent.com/debian/ bullseye main non-free contrib

   deb https://mirrors.tencent.com/debian-security/ bullseye-security main

   deb-src https://mirrors.tencent.com/debian-security/ bullseye-security main

   deb https://mirrors.tencent.com/debian/ bullseye-updates main non-free contrib

   deb-src https://mirrors.tencent.com/debian/ bullseye-updates main non-free contrib

   deb https://mirrors.tencent.com/debian/ bullseye-backports main non-free contrib

   deb-src https://mirrors.tencent.com/debian/ bullseye-backports main non-free contrib

   
   

7. 進入Debian后輸入apt-get update后報錯顯示沒有Release文件：

   執行以下命令：

   cd /etc/apt/sources.list.d

   rm AdoptOpenJDK.list mobian.list

   cd

   再次執行更新命令就不會報錯了。

   
   

8. 通過局域網IP無法連接上SSH報錯：

   在使用192.168.68.1本地連接上棒子后，輸入：

   apt-get install ufw

   ufw default allow

   然后就能通過局域網IP訪問連接上了。

   
   

9. 無法使用python：

   執行以下命令：

   sudo apt-get update

   sudo apt-get --purge -y remove python3 python3-pip python-is-python2

   sudo apt-get autoremove -y

   sudo apt install -y python3 python3-pip python-is-python2

   現在就已經修復好了。

   再輸入python3 --version，如果顯示了python的版本號，問題解決。

小技巧：

1. 怎么用XShell傳輸文件給棒子：

   執行命令：apt-get install lrzsz

   安裝完成后輸入rz選擇要上傳的文件就行了。

   XShell綠色版下載：https://wwt.lanzouj.com/i3Ohc0a9bdaj

2. 怎么用PuTTY傳輸文件給棒子：

   首先進入電腦PuTTY的安裝路徑，然后在路徑中打開cmd，輸入命令：

   pscp? 想要上傳的本地文件路徑? ?服務器登錄用戶名@棒子的局域網IP或本地IP:你想上傳的文件存放位置

   提示輸入密碼后再輸入棒子的登錄密碼就可以上傳了。

   PuTTY下載：https://wwt.lanzouj.com/ikCwh0aaiseb

3. Linux中的復制粘貼快捷鍵：

   Linux的復制粘貼快捷鍵與Windows是不一樣的，在Linux中，復制使用CTRL+INS，粘貼使用SHIFT+INS，CTRL+C在Linux中是終止當前命令，慎用！

目前我遇到的問題就是這些，大家有別的問題可以在評論區補充哦！