標準名稱

?

ASTM D696 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics between ?30°C and 30°C with a Vitreous Silica Dilatometer

ASTM D696使用石英玻璃熱膨脹儀測定-30℃和30℃范圍內的塑料線性熱膨脹系數的標準試驗方法

?

適用范圍

?

Scope：

This test method covers determination of the coefficient of linear thermal expansion for plastic materials having coefficients of expansion greater than 1 μm ?(m.°C) by use of a vitreous silica dilatometer. At the test temperatures and under the stresses imposed, the plastic materials shall have a negligible creep or elastic strain rate or both, insofar as these properties would significantly affect the accuracy of the measurements.

?

引用文件

?

ASTM D618 Practice for Conditioning Plastics for Testing

ASTM D883 Terminology Relating to Plastics

ASTM D4065 Practice for Plastics: Dynamic Mechanical Proper- ties: Determination and Report of Procedures

ASTM E228 Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer

ASTM E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

ASTM E831 Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis

?

相關標準

?

ISO 11359-2塑料 熱力學分析(TMA) 第2部分:線性熱膨脹系數和玻璃化轉變溫度的測定/Plastics - Thermomechanical Analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature

GB/T 36800.2塑料熱機械分析法(TMA) 第2部分:線性熱膨脹系數和玻璃化轉變溫度的測定/Plastics-Thermomechanical Analysis( TMA)一Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature

?

ASTM E831通過熱機械分析對固體材料線性熱膨脹的標準試驗方法/Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis

?

GB-T 2572纖維增強塑料平均線膨脹系數試驗方法/Fiber-reiforced plastics composites-Determination for mean coefficient of linear expansion

?

IPC TM-650 2.4.24玻璃轉變溫度及由TMA的Z軸熱膨脹系數/Glass Transition Temperature and Z-Axis Thermal Expansion by TMA

?

GB T 4722印制電路用剛性覆銅箔層壓板試驗方法/Test methods for rigid copper clad laminates for printed circuits board

?

ASTM D696使用石英玻璃熱膨脹儀測定-30℃和30℃范圍內的塑料線性熱膨脹系數的標準試驗方法/Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics between ?30°C and 30°C with a Vitreous Silica Dilatometer

?

GB/T 1036塑料 -30℃～30℃線膨脹系數的測定 石英膨脹計法/Test method for coefficient of linear thermal expansion of plastics between -30℃ and 30℃ with a vitreous silica dilatometer

?出自GF2022