HPC800是經過現場驗證的一長串產品中的最新產品

過程控制器?；?56 MHz、32位Freescale

Coldfire處理器，HPC800控制器可適用于

廣泛的應用和工藝要求。

通過S+工程工具配置，HPC800具有以下功能

一個由150多個預定義控件組成的龐大庫

算法或函數代碼（圖3）。這些功能

提供輕松設計復雜控制策略的能力

以啟動任何控制應用程序，包括連續的、順序的、，

批量和高級控制。除了標準功能

塊，HPC800支持C編程、批處理和

用戶定義的功能代碼。

HPC800控制器的功能包括：

?同時支持SD系列I/O、Harmony機架

I/O和S800 I/O子系統

?執行5000多個I/O的閉環控制

在小于250毫秒的時間內。

?可下載固件

?擴展用戶配置存儲器（NVRAM）和

運行時存儲器

?支持30000個功能塊

?靈活的在線配置能力

?支持最多8個分段任務，每個分段

支持執行周期時間降至1毫秒

?專用冗余對等控制器通信

總線支持小于100毫秒的更新速率

高可靠性和可用性

HPC800旨在提供最大的可靠性

以及可用性。采用所有級別的冗余設計-CPU，

電源、內部總線、I/O網絡、通信端口和

工廠網絡-HPC800控制器子系統提供

最高級別的可用性。符合國際標準

標準確保最高水平的可靠性和質量

需要滿足最嚴格的規范和

來自世界各地的要求。他們一起給予

用戶快速、準確、不間斷地控制

他們的加工生產，從而提高產量

效率、增加的可用性和更低的維護成本。

易用性

HPC800采用DIN導軌形狀系數，標準24 VDC

電源輸入和標準以太網

安裝簡單靈活。這降低了限制

根據機柜空間、尺寸或布局，并提供更廣泛的

商用電源和網絡的選擇

外圍設備，從而降低安裝和維護成本

成本。

對等控制器通信

用于對等控制器的HPC800專用總線（CW800）

通信可以實現小于

100毫秒。對于快速和精確的控制是至關重要的，

在幾個過程段之間進行協調（即

鍋爐和渦輪機），以及當使用過程點時

在幾個子系統中，而不添加現場變送器或

纜繩CW800對等通信總線已完全

冗余的

軟控制器減少了調試時間

對于新工廠、升級或擴建項目，SD系列

軟控制器可以顯著減少調試和

允許進行徹底測試的啟動時間和成本

在中實現控制回路之前對其進行預調諧

領域SD系列軟控制器使用相同的控制邏輯

（即功能塊配置）作為物理SD系列

控制器。與虛擬通信設備相結合

可以實現整個基于SD系列控制的系統

在一個或多個PC內，允許產生測試結果

在虛擬環境中可以直接轉移到

操作系統環境。

The HPC800 is the latest in a long line of field-proven

process controllers. Based on a 256 MHz, 32-bit Freescale

Coldfire processor, the HPC800 controller can be adapted to

a broad spectrum of applications and process requirements.

Configured by S+ Engineering tool, the HPC800 features

an extensive library of more than 150 pre-defined control

algorithms or function codes (figure 3). These functions

provide the ability to easily design complex control strategies

to fi t any control application, including continuous, sequential,

batch and advanced control. In addition to standard function

blocks, the HPC800 supports C programming, batch, and

user defined function codes.

HPC800 controller features include:

? Simultaneous support for SD Series I/O, Harmony Rack

I/O, and S800 I/O subsystems

? Execution of closed loop control of more than 5,000 I/O

in less than 250 msec.

? Downloadable firmware

? Extended user configuration memory (NVRAM) and

runtime memory (RAM)

? Support for 30,000 function blocks

? Flexible and online configuration capability

? Support for up to 8 segment tasks, each segment

supporting execution cycle time down to 1 msec

? Dedicated redundant peer-to-peer controller communication

bus supports update rates less than 100 msec

High reliability and availability

The HPC800 is designed to provide maximum reliability

and availability. With a redundant design at all levels -CPU,

power, internal bus, I/O networks, communication ports and

plant network - HPC800 controller subsystems provide the

highest level of availability. Compliance with international

standards assures the highest level of reliability and quality

needed to meet the most rigorous specifications and

requirements from around the world. Together, they give

users the benefi t of fast, accurate, uninterrupted control of

their process production, resulting in greater production

effi ciency, increased availability and lower maintenance costs.

Ease of use

HPC800 utilizes a DIN-rail form factor, standard 24 VDC

power inputs, and a standard Ethernet network to make

installation simple and flexible. This reduces the limits

on cabinet space, size or layout, and provides a broader

selection of commercial power supplies and network

peripherals, thus lowering both installation and maintenance

costs.

Peer-to-peer controller communications

HPC800’s dedicated bus (CW800) for peer-to-peer controller

communications can achieve update rates of less than

100 msec. It is essential for fast and accurate control,

coordinating between several process segments (ie, between

boiler and turbine), and for when a process point is used

in several subsystems without adding a field transmitter or

cable. The CW800 peer-to-peer communication bus is fully

redundant.

Soft controller reduces commissioning times

For new plant, upgrade, or expansion projects, SD Series

soft controllers can dramatically reduce commissioning and

start-up time and costs by permitting thorough testing and

pre-tuning of control loops prior to its implementation in the

field. The SD Series soft controller uses the same control logic

(ie, function block configuration) as the physical SD Series

controllers. Coupled with virtual communication devices, the

entire SD Series control-based system can be implemented

within one or more PCs which allow for testing results made

in the virtual environment to be directly transferable to the

operating system environment.