MOOG伺服控制器MSC

?可自由編程的多軸控制器

?使用IEC 61131開發環境進行編程

MACS（模擬軸控制軟件）

?集成PLC功能

?實現快速精確的控制

（例如位置、速度和力）

?適用于電動和液壓驅動器

?具有循環時間的可自由定義的控制器結構

從400μs

?硬件功能可以通過MACS參數化

軟件

?基于PowerPC的處理器

?內存：4 MB RAM；4 MB閃存EEPROM

特征

?DIN頂帽導軌安裝上的無工具裝配

?帶有接線板的簡單接線

?模擬和

數字輸出

?高達±36 V的過電壓保護

模擬輸入和輸出

?無磨損部件，無跳線，無電池

或可充電電池

?用于狀態和錯誤顯示的LED

?所有數字傳感器輸入的線路故障監測

和模擬電流輸出

?額外的數字或模擬輸入和輸出

帶有M3000擴展模塊

?M3000模塊通過

擴展總線

?Profibus DP從站作為選項

QEBUS-CAN模塊設計用于使用LocalCAN

用于外部CAN總線節點的總線。

LocalCAN總線集成在擴展總線插頭中

并通過QEBUS-CAN模塊通過

兩個D-Sub配合連接器。

此外，QEBUS-CAN模塊提供以下選項

使用跳線連接/斷開CAN終端

電阻器。

模塊安裝在DIN頂帽導軌上

直接連接到MSC或MSC II或擴展模塊

通過Q連接器。

MOOG SERVO CONTROLLER MSC

? Freely programmable multi-axis controller

? Programming with IEC 61131 development environment

MACS (Moog Axis Control Software)

? Integrated PLC functionality

? Realization of fast and precise controls

(e.g. for position, speed and force)

? Suitable for electrical and hydraulic drives

? Freely definable controller structures with cycle times

from 400 μs

? Hardware functionality can be parameterized via MACS

software

? PowerPC-based processor

? Memory: 4 MB RAM; 4 MB Flash EEPROM

FEATURES

? Tool-free assembly on DIN top-hat rail mounting

? Simple wiring with terminal strips

? Sustained short circuit protection for analog and

digital outputs

? Overvoltage protection up to ±36 V of

analog inputs and outputs

? No parts subject to wear, no jumpers, no battery

or rechargeable battery

? LEDs for status and error display

? Wire fault monitoring for all digital sensor inputs

and analog current outputs

? Additional digital or analog inputs and outputs

with M3000 extension modules

? Simple connection of the M3000 modules via

extension bus (E-bus)

? Profibus-DP slave as option

The QEBUS-CAN module is designed for using the LocalCAN

bus for external CAN bus nodes.

The LocalCAN bus is integrated in the extension bus plug

and is accessed via the QEBUS-CAN module by means of

two D-Sub mating connectors.

Furthermore, the QEBUS-CAN module offers the option of

using a jumper to connect/disconnect a CAN termination

resistor.

The module is mounted onto a DIN top-hat rail and is

directly attached to an MSC or MSC II or extension module

via the Q-connector.