如需了解更多相關內容，歡迎聯系我，sa@bstic.com

座墊，軟墊所有的個人柔性緩沖用于坐墊、床墊、床墊墊，扶手，防撞墊，還有扶手桿填充ASTM D36758 pcs, 150 mm wide by 460 mm long by? 25 mm thicknessASTM E66210 pcs of 75mmX75mmX thickness(Less than 25mm)

面料坐墊，床墊覆蓋物，窗簾，窗簾，窗戶遮陽板，編織座墊面料14 CFR 25, Appendix F, Part I?(vertical test)3平方米ASTM E662其他車輛部件座位和床墊框架、?墻體和吊頂襯料和面板、座位和坐便器外罩、托盤和其他桌子、隔墻、隔板、不透明風擋和可燃標志

ASTM E162 andASTM E662ASTM E 162:8 pieces, 6’'(152mm) wide by 18”(457mm) long by maximum 1” (25.4mm) thickness，8?片152mm×457mm×實際厚度（一般不大于25.4mm）;

ASTM E 662：10 pcs of 75mmX75mmX thickness(Less than 25mm)隔熱、隔聲材料HVAC管道光發散裝置、窗戶和透明塑料風擋膠粘劑和密封劑地板覆蓋材料

ASTM E 648Each direction 3pcs of 1050mm X 230mm X thicknessASTM E66210 pcs of 75mmX75mmX thickness(Less than 25mm)

彈性材料窗戶密封膠條、門密封板、車廂之間的振動板和屋頂覆蓋材料?ASTM C116610 pcs with the size of 13 mm (1?2 in.) thick, 25mm (1 in.) wide and 460 mm (18 in.) long,ASTM E66210 pcs of 75mmX75mmX thickness(Less than 25mm)

電線、電纜?所有的燃燒測試：UL 1581 section 1160、CAS C22.2 No.0.3、UL 1865、NPFA 262其中一個標準。

Based on the outer diameter of the canble and diameter of theconductor;?

試樣要求基于電纜外徑和導體外徑而定煙密度：ASTM E662結構件地板，其他類ASTM E119