The AC 800PEC combines high-speed control requirements for processes such as power electronics applications with low-speed process control tasks typically performed by independent PLC units. The AC 800PEC controller is configured and programmed using ABB's Control Builder M programming tool, which complies with IEC 61131-3, MATLAB,?

The AC 800PEC interfaces with ABB's I/O system through the optical S800 ModuleBus, and with ABB's communication module through the Communication Expansion Bus (CEX). It also supports third-party Anybus-S fieldbus modules. The control system can be programmed using Simulink and Simulink encoders. Access to controller hardware requires the AC 800PEC toolbox. Using Simulink external mode can achieve user-friendly monitoring.

AC 800PEC將電力電子應用等過程的高速控制要求與通常由獨立PLC單元執行的低速過程控制任務相結合。AC 800PEC控制器使用ABB的Control Builder M編程工具進行配置和編程，該工具符合IEC 61131-3、MATLAB、Simulink和Simulink編碼器。

AC 800PEC通過光學S800 ModuleBus與ABB的I/O系統接口，并通過通信擴展總線(CEX)與ABB的通信模塊接口。它還支持第三方Anybus-S現場總線模塊。控制系統可以使用Simulink和Simulink編碼器進行編程。訪問控制器硬件需要AC 800PEC工具箱。使用Simulink外部模式可以實現用戶友好的監控。